iOS · Android · IP cameras · Free with ads

Two phones. One peaceful night.

LullaLink turns the phones in your drawer — or the network camera already over the crib — into a premium baby monitor. Live audio & video, cry and breathing detection, encrypted end-to-end. Cozy by design. Quiet by default.

★★★★★
4.8 · 18,000+ exhausted parents agree
QR pairing 6-digit PIN ONVIF cameras
MONITORING
BPM 32 DB 28 TEMP
Baby unit
Sleeping
82% Wi-Fi · good
32 bpm
Parent unit
IP camera · ONVIF
🫧
Breathing steady 32 breaths / min
All quiet no cries in 2 h
$0
hardware cost
0ms
LAN latency
0ppl
simultaneous parents
0%
local traffic on Wi-Fi
E2E
DTLS-SRTP encrypted
What's inside

Everything a good monitor should do — and the things they can't.

01

Live A/V streaming

Full-duplex WebRTC at 480p 15 fps, with on-demand 720p HD burst. 48 kHz Opus audio always on.

02

On-device cry detection

A distilled YAMNet model runs locally. Cries are separated from white noise, TVs and siblings before alerts fire.

03

Breathing & motion, fused.

Audio energy and frame differencing combine — the breathing alert needs both signals, so false positives stay vanishingly rare. Nothing uploaded. Nothing stored.

live · 32 bpm
04

Built for the dark

Baby phone dims to zero. Parent dark mode is red-shifted. Haptics over sound, always.

05

Two-way talk

Hold to talk back. Your voice travels the same encrypted channel with a gentle volume boost on the baby side.

06

Lullabies & noise

Five lullabies, three noise colors, rain and a heartbeat track — started remotely, faded gently.

07

Event clips

10 s pre-roll + 20 s post on every cry. Stored locally on your phone, max 50 clips, oldest auto-rotates.

08

Up to four parents.

Grandparents, co-parents, a trusted sitter — everyone connects to the same baby unit simultaneously. Any of them can talk back.

MR DK PS JL +
09

Works with network cameras.

Already own a Wyze, Reolink, Eufy, UniFi, Tapo, or any ONVIF / RTSP camera over the crib? Pair it in three taps. LullaLink handles discovery, auth and the stream — same alerts, same HD burst, same two-way audio (when the camera supports it).

ONVIF RTSP Wyze Reolink Tapo UniFi + more
How it works

Set up in under a minute.

  1. 01

    Pick your source

    Open the app and choose what to monitor from: a phone you keep in the drawer, a spare tablet, or an ONVIF / RTSP camera already over the crib. Any combination works.

  2. OR 482 6-DIGIT PIN
    02

    Scan a QR or type a PIN

    Pairing takes about ten seconds. Point one phone at the other's QR code, or read the 6-digit PIN aloud. Sign in once to pair across networks — phones or cameras, same flow.

  3. 03

    Place & monitor

    Prop the baby phone near the crib, or aim your IP camera, and plug it in. The parent phone is your live view, your alerts, your talkback.

Transport

Three roads in, in order of speed.

▲ Fastest

Same Wi-Fi

Direct peer-to-peer over your home network. Lowest latency, zero bandwidth cost.

◆ Fallback

Bluetooth direct

Audio-first fallback when Wi-Fi isn't available. Great for travel.

☽ Anywhere

Cloud relay

Check in from work or the grocery store. Fully end-to-end encrypted.

Privacy-first

Your baby's room is not a data source.

Every LullaLink stream is peer-to-peer and encrypted with DTLS-SRTP. On your Wi-Fi, traffic never leaves the network. Cloud relay is opt-in, end-to-end encrypted, and self-hostable.

  • No recordings uploaded anywhere by default
  • No analytics on audio or video content
  • Free tier has ads (Google AdMob) — never on the baby phone, never with sound on the baby side
  • Pro unlocks an ad-free experience for both phones
  • Delete your account & keys with one tap
Questions

Good questions, short answers.

01Do I need new phones?

No — any iPhone from 2018 or Android 8.0+ works. LullaLink is built to give your drawer phones a second life.

02Does it drain the baby phone's battery?

Overnight monitoring uses roughly 20–30% on a modern phone — we recommend keeping it plugged in. The screen dims to zero once monitoring starts.

03Can I monitor from outside the house?

Yes — create a free account and the app will use cloud-relayed WebRTC. All traffic stays end-to-end encrypted.

04Is there a subscription?

LullaLink is free forever with light ads. For an ad-free experience, pay $49 once (normally $79) or $5.99 a month via Google Play — both unlock every Premium feature including cloud relay, HD burst and unlimited cameras.

05What about false cry alerts?

A two-window confirmation plus a user sensitivity slider cut false positives. TVs, white noise machines and siblings are classified separately.

06Is this safe for SIDS prevention?

LullaLink is not a medical device. Use it as a monitor, not as a replacement for safe-sleep guidelines or medical advice.

07Can I use my existing IP camera?

Yes. LullaLink pairs with any camera that speaks ONVIF or exposes an RTSP stream — Wyze, Reolink, Eufy, Tapo, UniFi Protect, Amcrest and most others. Enter the IP or scan the QR on the camera and it appears alongside your phones.

Plans

Simple pricing. No tricks.

Start free with ads. Upgrade once, forever — or month-to-month. Billed through Google Play.

Starter

Free with ads

$0 forever
  • Live A/V on same Wi-Fi
  • Cry & motion detection
  • Two-way push-to-talk
  • Pair 2 devices
  • ·Occasional non-intrusive ads
Download free

No sign-up required.

Monthly

Subscription, via Google Play

$5.99 / month
  • Everything in Lifetime
  • Cancel anytime in Play Store
  • Great for short-term needs
  • ·Break-even at 9 months — most pick Lifetime
Subscribe

Renews monthly until cancelled. Manage in Google Play.

Billed by Google Play. We never see your card.
Upgrade from Monthly to Lifetime anytime — we credit the difference.
Family sharing supported — one purchase covers up to 6 accounts.
Ready when you are

Two phones away from a quieter night.

Free on iOS and Android. Install on both phones, pair once, sleep easier. Works with your network cameras, too.